Endura Pro Updown Sensor LED outdoor wall light As the name suggests, the Endura Pro Updown Sensor LED outdoor wall light emits light both upwards and downwards, each at an angle of 50°. This creates a decorative lighting effect on the façade in addition to the purpose of illumination, especially when the light is installed on long façades, for example, with several lights evenly spaced. The sensor integrated in the centre of the light has a detection angle of 180°, a range of 12 metres and can be set to a response brightness of 1 - 1,000 lux. It switches the light on automatically when motion is detected, with a light duration that can be selected between 5 seconds and 15 minutes. A modern design, IP55 protection class and an impact resistance index of IK05 make the light suitable for use both in private homes and in commercial areas, for example on the facades of warehouses etc. The Endura Pro updown Sensor wall light can be switched in 4 setting modes: 6 hours permanent light, stand-by mode, switch-on on movement or twilight. The new LEDVANCE products, formerly known under the OSRAM brand name, combine the highest quality standards with modern design.